Quick Delivery

We hold a large UK stock, allowing us to meet our customer demands, and provide an attentive and customer focussed service.

Highly Experienced Team

One of the most experienced, highly regarded and knowledgeable teams in the industry ready to help and pass on this knowledge.

Exceptional Product Quality

Our products are manufactured to the relevant BS/EN standards and checked by our dedicated quality controller to ensure we only provide products to the very best of standards. Including the Lattix Mast, the very first crash friendly, passively safe sign post to the latest; HCP Passively safe sign post from HYDRO which ATP have UK exclusivity.

www.alltrafficproducts.co.uk   Email: sales@alltrafficproducts.co.uk  Tel: 01902 919649

Unit 5 Planetary Industrial Estate, Planetary Road, Wednesfield
Wolverhampton WV13 3XA

Smartraft®

Smartraft® is an off-site pre-fabricated, modular concrete foundation to allow for a safe, quick, efficient barrier installation. There is no requirement for pre-site ground testing as offsite testing has proven results.

Foundation depth required for installation of Smartraft® is just 200mm so problematic services, underground structures other ground obstructions can all be overcome with this one simple solution.

Asset VRS is the UK’s leading supplier and manufacturer of temporary vehicle restraint systems, including safety barriers and vehicle attenuator systems. We also supply and install special low deflection permanent road safety systems, easy opening vehicular gates and crash cushions. The business provides a full installation service from strategically located depots around the UK and Ireland.

Boundary Concepts Limited (BCL), founded in 2020, is a specialist consultancy in highway risk assessment, sustainable solutions, and cost-effective mitigation strategies. Our focus on “right-first-time” activities ensures that project solutions are implemented effectively and efficiently from the outset. +44(0) 7736 159853

Our Approach

BCL adopts a holistic approach to quality, safety, and sustainability in hazard segregation, aiming to provide cradle-to-grave solutions that minimize total cost through risk mitigation. With over 35 years of SHEQ experience, founder Mark Reynolds has developed and implemented renowned road restraint systems used globally, including bespoke solutions for complex UK structures such as Brent Cross, Tinsley Viaduct, and Mersey Gateway Bridge. His expertise with both permanent and temporary road restraint systems also extends to hostile vehicle mitigation solutions, designed for both temporary and permanent applications.

Expertise in Independent Assessment and Technical Support

Mark Reynolds offers independent advice on design, manufacturing and conformance of RRS, with over 20 years of impact testing experience. Mark and BCL provide technical support for delivering new and modified RRS products, as well as conducting technical peer reviews for sections of DMRB and MCHW standards, with over 20 years of impact testing experience. 

Bespoke Training and Industry Contributions

In addition to consultancy, BCL offers customized training packages on topics such as RRS risk assessment and installation design, and hosts a Lantra Training Centre to deliver Customised Provisions. From 2007 to 2023, Mark served on the RRS National Highway Sector Schemes (NHSS), including five years as chairperson, and designed and developed the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) for RRS in Australasia.

Collaboration and Supply Chain Partnerships

BCL partners with a network of suppliers for services such as product design, CAD, proofreading, and fabrication of single and short-run RRS components.

Our Key Services and Solutions

BCL’s expertise spans a range of assessment, design, and compliance services:

• Risk-Based Assessment of Need: Including the Road Restraint Risk Assessment Process (RRRAP), Local Authority Road RRS (PRRSLA), Network Rail’s Risk of Vehicle Incursion (RVI) Assessment, and BCL’s proprietary ‘Assessment of Need (RRS) Total Assessment®.’
• Development of Risk Management Tools: Customized for RRS applications.
• Assessment and Design Reporting: Using Local Traffic Notices frameworks, such as Traffic Calming (1/07), Safe Streets for Mixed Use (3/08), Pedestrian Guardrailing (2/09) and Cycle Infrastructure (1/20); in addition to Traffic Advisory Leaflets Managing Railway Obstructions (6/03), Rumblewear (1/05) and  Vehicle Security Barriers (1/11).
• Preparation of RRS Departures from Requirements/Standards: Providing flexibility and customization when standard guidelines require adaptation.
• Specialized Training Programs: Tailored to meet the needs of NHSS and ASHTAS frameworks, in addition to bespoke client solutions.

Quality and Risk Management Support

BCL also provides support for frameworks aligned with ISO 10015 (Competency Management), ISO 10018 (People Engagement), ISO 31000 (Risk Management Systems), IOS 55001 Asset Management Systems and ISO 56001 Innovation Management Systems ensuring comprehensive quality and risk management solutions for our clients, in addition to the application of kaizen, lean and 5S within these environs.

Buchanan Computing are developers of SignPlot and SignLoad: intelligent software for traffic sign design, economical sign structures and passive safety checks.

Our CELsafe Passive Safety System offers four configurations including Disruption Pillars and Standard Passive connection at the Lighting Column.  Each option has several components that can be used to achieve the best solution with drawings and schematics available to help you select the correct system for your project.

Contact details:

info@charlesendirect.com or Call +44(0)1963 828 400 to speak to our Technical Team to discuss your requirement.

C.U. Phosco provides an in-house, end-to-end service encompassing the design, manufacture, installation and maintenance of high masts, columns, and lighting for the global market. 

Established in 1923, our century-long legacy of technical expertise and operational integrity has earned the trust and business of customers worldwide across sectors including road, telecoms, airports, ports, and sports.

Our lighting products and columns, and masts, from 3 metres to 60 metres in height, can be seen on roads, motorways, at airports and ports, shopping centres, residential areas, and sports stadiums throughout the world. Our range includes steel and aluminium columns, as well as luminaires – from our popular E95X range for residential, P86X for highways and main roads and FL8X floodlighting range.

We look after our customers from initial consultation through to detailed design, manufacture, installation, final commissioning and follow up maintenance. Our dedicated Contract Services Division can help to manage your projects worldwide providing you with a level of support that is unparalleled in the lighting industry.

Frangible Safety Posts Ltd (FSP) supplies passively safe sign posts to the UK, European and Worldwide markets. The objective of the FSP system is to enhance road safety, reduce road related fatalities and injuries and at the same time demonstrate environmental credentials by offering a durable, sustainable product that can be reused in a number of applications after a long service life.

GDTech specialize in simulation/optimization of roadside safety equipment (safety barriers, crash cushions, passive / safe poles, anti-intrusion products, anti-falling rock protections, …) to comply with the EN1317, EN12767, TS17342, TS16786, NCHRP350, MASH, PAS68, ASTM F2656, ISO22343-1, EAD340059

Glasdon UK Limited design, manufacture and supply a range of low-maintenance road safety products including illuminated and non-illuminated bollards, verge marker posts, chevron sign systems, along with street lighting, street furniture and winter maintenance products. For 'crash friendly products' visit the UK Roads Passive Safety website

On roads and secure locations, at private properties and high-profile events, Hardstaff Barriers helps to keep road users, workers and the general public safe. Entrusted with delivery of the National Barrier Asset (NBA), Hardstaff is well respected in the industry. Our solutions are adaptable and include zonal protection and delineation, Hostile Vehicle Mitigation (HVM), complete temporary and permanent vehicle restraint systems for highways, motorways and trunk roads

At Hill & Smith Barriers, we design and develop steel products and systems that help people around the world travel safely every day. In the 1950s, the company began supplying the very first tested vehicle restraint system on the market to the Department for Transport (now National Highways). Driven by exceptional service, our resources and expertise allow customers to access world-leading highway safety solutions and intelligent protection systems

Hill and Smith Infrastructure Ltd. brings together four leading vehicle restraint system (VRS) manufacturers and suppliers: Asset VRS, Hardstaff Barriers, Hill & Smith Barriers, and Varley & Gulliver Parapets. Working together to support projects in the UK and worldwide, the four businesses are well-known for exceptional service, quality and expertise, and are committed to protecting people and property. Our solutions are tested to the highest British, European and USA standards and our staff are highly trained to exacting standards.

Hydro Pole Products offers safe, secure and sustainable aluminium solutions for all of your lighting needs. We give you the opportunity to design and create safe roads with Fully Certified (and endorsed by a Notified Body) passively safe columns in all shapes and sizes. For more information (and crash test videos) please check out our website Pole Products (hydro.com)

Kloeckner Metals UK are the distributors of FSP passive posts, Dibond Traffic Composite, along with the widest available range of components for manufactures of Road Traffic Signage

Under the brand name Lattix®, Lattix Production AB provides mast systems for road traffic, aviation, and multi-purpose applications. Having a strong focus on research and development Lattix Production AB has a leading position in passiv safe, lightweight, and frangible mast systems.

Lattix® is the leading brand for passive safety road traffic structures in the Northern European Countries, UK and Australia. Further, Lattix® frangible aviation mast solutions have been delivered to ca 250 airports in more than 40 countries.

Lattix Production AB is headquartered in Dals Långed in Dalsland, Sweden, close to the Norwegian border. Sales and engineering have satellite facilities in Norway.

Web: www.westcotec.co.uk

​Email: order@lattix.net

Mallatite offer a full range of aluminium lighting columns and brackets together with a bespoke architectural range for unique design concepts with BS EN 12767 testing. A full range of NE rated sign posts are also provided within the range, together with glass fibre columns and posts

Melba Swintex is the World’s leading manufacturer of Temporary Traffic Management products. Specialising in the manufacture & distribution of safety products such as Pedestrian Barriers, Traffic Cones, and Temporary Signs via a number of manufacturing methods.

Our solid commitment to the environment ensures all products are either manufactured from recycled materials, or are 100% completely recyclable, and with our Clode Loop Recycling scheme, end-of-life products are given a new lease of life and prevented from heading to landfill.

Multi-Contracting Services

NAL are suppliers of Retention Sockets foundations for all types of illuminated and non illuminated post installations. NAL’s Safety Isolation System has been specifically designed to meet TA 89/05 in its requirement to electrically isolate a roadside structure in the event of a collision

Traffic Management Products (TMP Solutions) brought the first passively safe retroreflective traffic bollard to our roads almost twenty years ago, basically inventing the traffic bollard as we know it today.

Since then, we've listened to our customers and used our experience to develop a whole crash friendly product range: from the industry-standard Evo-N rebound traffic bollard, through to the versatile LockSafe street bollard range and the HEA product of the year award- winning Evo-Chev passive chevron system.
We've packed innovation and quality assurance into each and every product we produce. Our crash friendly range is fully BS EN 12767 compliant and real-world tested. #MadeInBritain #UKManufacturer

To find out more and buy online visit www.tmp.solutions

With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by our five core divisions: Application Solutions, Enterprise Solutions, Simulation Solutions, and Advanced Manufacturing.

Alongside these global divisions, we have a number of active brands that operate regionally, primarily providing design, engineering and manufacturing solutions.

A leading manufacturer of bridge parapets, pedestrian barriers, bespoke fabrications and passive sign supports, Varley & Gulliver has led the way in metal fabrication since the 1920s. From technical design to manufacture, installation and ongoing management, we deliver on-plan, on-budget and on-time. Over the years we have forged a position as a major player in highway safety

Westcotec design, manufacture and install, a comprehensive range of quality vehicle activated signs and innovative traffic safety systems. We also provide free consultation & advice on ways to improve your accident black spots. For 'crash friendly products' visit the Passive Safety website.

Web: www.westcotec.co.uk

Email: sales@westcotec.co.uk