Signals equipment
Supplier/Manufacturer Product Name Features Additional Information Picture
NAL   Cover Me  Manufactured specifically to customer specifications. Facility to add logos. Different length cords for taller signals such as those required for motorway slip roads. 

Cover Me is a traffic signal bag that is designed and has a patented system that allows them to be installed in seconds from ground level by one operative without the use of ladders.

 

Click to Enlarge More....
NAL   Controller Cabinet Base  Flexible system which enables installation in the most difficult and congested site. Eliminates risk of condensation without the need for carcinogenic base seal. Allows additional or replacement cables to be installed at a fraction of the cost.  

The NAL Controller Cabinet Base has been designed to simplify the installation, upgrading and replacement of all types of Electrical Highway Control Cabinets. The system offers a fully ventilated base unit which facilitates the connection of underground duct and cables into any type of electrical cabinet.

 

Click to Enlarge More....
NAL   CabiLIFT and ColumnMATE  Manufactured from lightweight aluminium ensuring manual handling is reduced and can be folded flat for easy transportation in the maintenance vehicle. 

The CabiLIFT provides a safe two-man method of operation to carry and place most types of cabinets. The ColumnMATE has been designed to aid in the cabling of traffic signal poles. With its stable footprint the signal pole can be strapped and secured to the ColumnMATE while all top cap cabling is carried out. It is manufactured from lightweight aluminium ensuring manual handling is reduced and can be folded flat for easy transportation in the maintenance vehicle.

 

Click to Enlarge More....
NAL   Cycle Signal Pole  Innovative venting system which ensures there is a constant air flow within the pole, therefore eliminating any risk of condensation. Low level termination access point, enabling maintenance works to be carried out safely at ground level. 

With the increasing number of people cycling in urban areas, the requirement to have segregation for cyclists at signalised junctions has never been more important. NAL have developed a CYCLE SIGNAL POLE specifically for use with the new range of low level Cycle Signal Aspects.

 

Click to Enlarge More....
NAL   Traffic Signal Enclosure and Vented Top Cap  Fits neatly within a standard 114mm Steel Traffic Signal Pole. Manufactured in a 3 part modular unit. Allows cabling works to be done outside the pole. Designed to IP65.  

The NAL Traffic Signal Termination Enclosure with Vented Top Cap have been specifically developed to enable all traffic signal terminations to be located behind a low level pole access door. The Enclosure will fit in any traffic signal of 114mm diameter or greater.

 

Click to Enlarge More....
NAL   Rotating Mast Arm  Mast Arm allows for rotation through 180. Maximises cost efficiency. 

The Rotating Mast Arm is a complete traffic signal/maintenance solution. Designed to address a number of traffic maintenance concerns, namely operative safety and disruption to busy traffic flows.

 

Click to Enlarge More....
SignPost Solutions   Traffic Signal Pole  Standard finishes are galvanised and PVC coating. In house tube bending to create the smooth crank (swan neck) design. A variety of lengths and designs. Bespoke designs available. Large stockholding of standard steel posts.  

Signpost Solutions are the UK’s largest manufacturer and supplier of traffic signal poles.

 

Click to Enlarge More....
SWARCO Traffic   FUTURLED COUNTDOWN  Self-learning or fixed time mode. No additional wiring to intersection controller. Safety switch-off. Easily mounted into traffic signal housings. Displays remaining ON-time of red and/or green main signal. Optional on-site configuration. 

FUTURLED countdown signals indicate the time remaining until the next red or green phase and thus contribute to better orientation and less risky behaviour of pedestrians and motorists at intersections.

 

Click to Enlarge More....
SWARCO Traffic   MINISIGNAL  FUTURLED ensures lowest power consumption and a brilliant light output. Eliminates the need for maintenance. Longevity of operation. Vertical and horizontal mounting. Wide range of symbols 

MINISIGNAL – available as repeater signal at intersections, for parking applications and as signal for bicycle lanes. The polycarbonate mini-signal is also available with normal and extra-wide optical angularity.

 

Click to Enlarge More....
SWARCO Traffic   FUTURLED3  No LED dots visible, very uniform signal glow central light source. Highest anti-phantom performance (class 5). Custom-made masks allow any symbol display. Life cycle > 5 years. Optical monitoring available  

FUTURLED 3 RETROFIT MODULES: the easiest way to refit conventional signals with state-of-the-art LED traffic signal heads.

 

Click to Enlarge More....
SWARCO Traffic   STANDARD  Can be supplied with different types of light sources and electronics. Manufactured using UV-stabilized polycarbonate. Particularly resistant to mechanical stress, adverse weather conditions and solar radiation.  

STANDARD - our first ever polycarbonate traffic signal head remains the state of the art standard in many countries due to its robust design, reliability, and universal usability.

 

Click to Enlarge More....
SWARCO Traffic   ALUSTAR  Available with aspect diameters of 100, 210, or 300 mm. Harmoniously integrates into urban landscapes. Combination of superb optical quality with an attractive design  The innovative ALUSTAR is SWARCO’s LED-based traffic signal made of aluminium.  
Click to Enlarge More....
SWARCO Traffic   FUTURA  Polycarbonate traffic signal head purely designed for LED technology. Slim and elegant design. Contributes to the reduction of CO2 emissions  FUTURA is the world’s first traffic signal developed under eco-design principles and sets a new level in 21st century traffic signalling. 
Click to Enlarge More....